Boiler application pre-filter cyclone separator plate metal dust cyclone separator
Dust Collector Cyclone Brief Introduction
1. Mechanical dust collectors, often called cyclones or multiclones have been used extensively to separate large particles from a flue gas stream. Mechanical collectors are particulate control devices that use centrifugal force, gravity settling, and inertia to collect pollutants. Mechanical collectors can handle high dust loadings.
2. In cyclone separators, cyclonic separation method of removing particulates is used. Rotational effects and gravity are used to separate mixtures of solids and fluids.
Abstract
1. Cyclones are the most common dust-removal systems used in combined cycle fluidized bed combustion boilers. Analysis of a cyclone separator combining flow and structural aspects is carried out using detailed three dimensional finite element modeling including stiffeners and supporting arrangement. The fluid flow study involves the solution of continuity, energy and Navier-Stokes equations.
2. The fluid analysis gives the variation of pressure on cyclone shell, which in turn is imparted on the structural model using fluid structure interface routine. The pressure distribution obtained from the fluid-flow analysis is mapped on to the structure. Then a linear static analysis is performed considering thermal, wind and seismic loads besides the pressure loads. The results for various loads include the reaction forces at the supports and stress levels in the cyclone. The stresses are checked against the allowable values as per Indian Standard Structural Codes.
3. A separate computer code is developed and is interfaced with the FEM program. Results indicate higher stresses in some of the beam stiffeners and at support locations. These are suitably modified and a reanalysis confirmed the stresses to be within limits. The analysis methodology combining the fluid, structure and code requirement developed shall be very useful for the design improvement and safe operation of a cyclone separator.
1. The collected product remainls dry
2. Can handle sticky and tacky solids with proper liquid irrigation
3. Low maintenance cost
4. Very compact in most applications
5. Can be used under very extreme processing conditions
6. No moving parts
7. Constant Pressure Drop
8. Can be equipped with erosion or corrosion resistant
9. Can be fabricated with plate metal
10. Separate liquid or solid particulates,sometiome both in combination with proper design
Technical Parameter
| Type | Air Volume
(m3/h) | Filter Bag Qty(Pcs) | Filter Bag Size(mm) | Dust Collector Size
(mm) |
| MC-24 | 864 - 2700 | 24 | 130 X 2000 | 1400 X 800 X 5500 |
| MC-36 | 1296 - 4050 | 36 | 130 X 2000 | 1400 X 1200 X 5500 |
| MC-60 | 2160 - 6750 | 60 | 130 X 2000 | 2200 X 1200 X 5500 |
| MC-72 | 2592 - 8100 | 72 | 130 X 2000 | 2000 X 1600 X 5500 |
| MC-100 | 4560 - 14250 | 100 | 130 X 2500 | 2200 X 2000 X 6000 |
| MC-120 | 5472 - 17100 | 120 | 130 X 2500 | 2200 X 2400 X 6000 |
| MC-150 | 6840 - 21375 | 150 | 130 X 2500 | 2200 X 3000 X 6000 |
| MC-200 | 9120 - 28500 | 200 | 130 X 2500 | 2200 X 4000 X 6000 |
| MC-280 | 12768 - 39900 | 280 | 130 X 2500 | 2200 X 5600 X 6000 |
| MC-400 | 37440 - 117000 | 400 | 130 X 5000 | 2200 X 8000 X 8500 |
Product Display
Product Tags:
|
|
Pre Filter Boiler Dust Collector , Plate Metal Multi Cyclone Separator Centrifugal Force Images
|
